Fagor CNC 8055 TC - 4.3.1 Editing an Operation or Cycle

SELF-TEACHING MANUAL
59
·TC· Option
OPERATIONS OR CYCLES.
4
4.3.1 Editing an operation or cycle.
As an example, select the taper turning cycle.
Use the [LEVEL CYCLE] key to select the cycle level to be executed. Remember that not all the cycles have several levels.
Work cycle.
Help graphics.
Spindle conditions.
Real position of the axes and
cutting conditions.
Defining the geometry of the
cycle.
Machining conditions for
roughing.
Machining conditions for
finishing.