SELF-TEACHING MANUAL
65
·TC· Option
OPERATIONS OR CYCLES.
4
GRAPHIC OPTIONS. DISPLAY AREA.
With this option it is possible to define the display area by defining the maximum and minimum values for each axis.
GRAPHIC OPTIONS. ZOOM.
It may be used to enlarge or shrink the drawing or part of it. The new display area is selected using a window super-imposed
on the shown tool path.
To return to the original display area, select the option: "initial value".
Selecting the coordinates.
Validating the new values.
To enlarge or shrink the drawing, use the softkeys "ZOOM+" and "ZOOM-".
To move the zoom window.
Validating the new values.
To draws the selected area.
To Next Page
Loading...
