PART - PROGRAMS CYCLES
1 - ROUNDING CYCLE 1
2 - TURNING CYCLE
3 - TAPER TURNING CYCLE 1
- - CREATING A NEW PART - -
111 - THREADED AXIS
122 - TAPER AXIS
333 -
444 -
555 - EXAMPLE
PART - PROGRAMS CYCLES
1 - TAPER TURNING CYCLE 1
2 - ROUNDING CYCLE 1
3 - TURNING CYCLE
- - CREATING A NEW PART - -
111 - THREADED AXIS
122 - TAPER AXIS
333 -
444 -
555 - EXAMPLE
Changing the position of an operation.
Select the operation to be
relocated and press the two-
color key.
Select the new position for the
operation and press [ENTER].
The new operation is
inserted after the selected
position.
PART - PROGRAMS CYCLES
1 - TAPER TURNING CYCLE 1
2 - ROUNDING CYCLE 1
3 - TURNING CYCLE
- - CREATING A NEW PART - -
111 - THREADED AXIS
122 - TAPER AXIS
333 -
444 -
555 - EXAMPLE
To Next Page
Loading...
