·106·
Operating manual
CNC 8055
CNC 8055i
5.
EDIT
·T· MODEL
SOFT: V02.2X
Include program
5.9 Include program
With this option it is possible to include or merge the contents of a program from any unit, except
DNC, into the currently selected program.
Once this option is selected, the CNC will request the number of the source program to be merged.
After entering the program number press [ENTER].
Next, indicate with the cursor the block after which the source program will be included.
Press the "START OPERATION" softkey to carry out this command.
To Next Page
Loading...
