·106·
Installation manual
CNC 8055
CNC 8055i
2.
CNC 8055 I CONFIGURATION
SOFT: V02.2X
Operator panel
With a PLC.
CNC general logic output CUSTOM (M5512) indicates to the PLC the currently selected work mode.
If CUSTOM=O23 is programmed at the PLC, output O23 indicates the work mode selected at the
CNC.
Therefore, when doing the connection of the figure, every time the work mode is changed, the
corresponding keyboard will be selected.
CUSTOM (M5512) = 0 M or T work mode.
CUSTOM (M5512) = 1 MC, TC, MCO or TCO work mode.
To Next Page
Loading...
