·148·
Installation manual
CNC 8055
CNC 8055i
6.
MACHINE PARAMETERS
SOFT: V02.2X
General machine parameters
6.3 General machine parameters
AXIS1 (P0) AXIS2 (P1) AXIS3 (P2) AXIS4 (P3)
AXIS5 (P4) AXIS6 (P5) AXIS7 (P6) AXIS8 (P7)
They permit associating axes, handwheels, spindles or live tools with each feedback input and
analog output according to the following code:
The following table shows the feedback input, the velocity command output and the default values
associated with each parameter.
For the 8055 CNC model.
The connectors refer to the axis board.
Value Meaning Value Meaning
0 Free; not associated. 12 Handwheel with axis selector button
1X axis. 13 Auxiliary spindle.
Live tool.
2Y axis. 14 Second main spindle
3Z axis. 21 Handwheel associated with X.
4U axis. 22 Handwheel associated with Y.
5V axis. 23 Handwheel associated with Z.
6W axis. 24 Handwheel associated with U.
7A axis. 25 Handwheel associated with V.
8B axis. 26 Handwheel associated with W.
9C axis. 27 Handwheel associated with A.
10 Main spindle. 28 Handwheel associated with B.
11 Handwheel. 29 Handwheel associated with C.
Parameter Feedback Command Default value
(connector) (connector X8) - M - - T -
AXIS1 (P0) X1 O1 - Pin 1 1 (X axis) 1 (X axis)
AXIS2 (P1) X2 O2 - Pin 2 2 (Y axis) 3 (Z axis)
AXIS3 (P2) X3 O3 - Pin 3 3 (Z axis) 10 (spindle)
AXIS4 (P3) X4 O4 - Pin 4 4 (U axis) 11 (handwheel)
AXIS5 (P4) X5 (1-6) O5 - Pin 5 5 (V axis) 0 (free)
AXIS6 (P5) X5 (9-14) O6 - Pin 6 10 (spindle) 0 (free)
AXIS7 (P6) X6 (1-6) O7 - Pin 7 11 (handwheel) 0 (free)
AXIS8 (P7) X6 (9-14) O8 - Pin 8 0 (free) 0 (free)
To Next Page
Loading...
