Installation manual
CNC 8055
CNC 8055i
MACHINE PARAMETERS
6.
SOFT: V02.2X
·271·
Serial line parameters
EOFCHR (P9)
Indicates the character used to indicate "end of text" (end of file) when communicating with a general
peripheral device.
XONXOFF (P10)
Indicates whether the XON-XOFF communications protocol is active or not when operating with a
generic peripheral.
RCVMAXCAR (P11)
It indicates the maximum number of characters that may be received in the communication.
RCVENDTI (P12)
Indicates the maximum reception time. Reception ends when the time indicated in this parameter
has elapsed, after reception began.
Value Meaning
0EOT.
1 ESC.
2SUB
3ETX
Default value: 0
Value Meaning
ON It is active.
OFF It is NOT active.
Default value: ON
Possible values
Integer numbers between 0 and 255.
Default value: 0.
Possible values
Integers between 0 and 65535 ms.
Default value: 0.
To Next Page
Loading...
