CNC 8055
CNC 8055i
SOFT: V02.2X
7
·291·
CONCEPTS
7.1 Axes and coordinate systems
Given that the purpose of the CNC is to control the movement and positioning of axes, it is necessary
to determine the position of the point to be reached through its coordinates.
The CNC allows you to use absolute, relative or incremental coordinates throughout the same
program.
Axis nomenclature
The axes are named according to DIN 66217.
Characteristics of the system of axes:
X and Y main movements on the main work plane of the machine.
Z parallel to the main axis of the machine, perpendicular to the main XY plane.
U, V, W auxiliary axes parallel to X, Y, Z respectively.
A, B, C Rotary axes on each axis X, Y, Z.
It is recommended to save the machine parameters as well as the PLC program and files into the hard
disk (KeyCF) or in a peripheral or PC to avoid losing them.
To Next Page
Loading...
