Installation manual
CNC 8055
CNC 8055i
CONCEPTS
7.
SOFT: V02.2X
·293·
Axes and coordinate systems
Example of lathe
The machine has two regular linear axes: X and Z, a "C" axis, an analog spindle (S) and an auxiliary
spindle (live tool).
Setting of general parameters AXIS1 (P0) through AXIS8 (P7).
The CNC activates a machine parameter table for each axis (X, Z, C), one for the main spindle (S)
and another one for the auxiliary spindle.
axis parameter AXISTYPE (P0) must be set as follows.
spindle parameter SPDLTYPE (P0) must be set as follows:
Likewise, axis parameter DFORMAT (P1) and spindle parameter DOFORMAT (P1) must be properly
set to indicate their display formats.
AXIS1 (P0) = 1 X axis associated with feedback X1 and output O1.
AXIS2 (P1) = 3 Z axis associated with feedback X2 and output O2.
AXIS3 (P2) = 10 Spindle (S) associated with feedback X3 and output O3.
AXIS4 (P3) = 9 "C" axis associated with feedback X4 and output O4.
AXIS5 (P4) = 13 Auxiliary spindle associated with feedback X5 (1-6) and output O5.
AXIS6 (P5) = 0
AXIS7 (P6) = 0
AXIS8 (P7) = 0
X axis AXISTYPE (P0) = 0 Regular linear axis
Z axis AXISTYPE (P0) = 0 Regular linear axis
"C" axis AXISTYPE (P0) = 2 Normal rotary axis
Spindle SPDLTYPE (P0) = 0 ±10V spindle analog output.
To Next Page
Loading...
