·372·
Installation manual
CNC 8055
CNC 8055i
7.
CONCEPTS
SOFT: V02.2X
Axes (2) controlled by a single drive
1 motor and DRIBUSLE=0
Analog or Sercos connection with DRIBUSLE=0. The feedback is taken to the CNC connector for
the spindle and there is 1 motor.
The feedback must be connected to the spindle (S) connector.
Use the velocity command for the spindle (S).
DRIBUSLE=1
Sercos connection with DRIBUSLE=1. The axis feedback is handled via Sercos, first feedback
(motor feedback) and the command for the drive is sent via Sercos.
Spindle (S) "C" axis
DRIBUSLE (P51) = 0 DRIBUSLE
SWITCHAX
SWINBACK
(P63) = 0
(P65) = 10
(P66) = 0
Spindle (S) "C" axis
DRIBUSLE (P51) = 1 DRIBUSLE
SWITCHAX
SWINBACK
(P63) = 1
(P65) = 10
(P66) = 0
To Next Page
Loading...
