Installation manual
CNC 8055
CNC 8055i
LOGIC CNC INPUTS AND OUTPUTS
12.
SOFT: V02.2X
·525·
Logic outputs of key status
12.11 Logic outputs of key status
KEYBD1 (R560) KEYBD2 (R561) KEYBD3 (R562) KEYBD4 (R563)
These registers indicate whether or not one of the keys on the keyboard or on the operator panel
is pressed. When one of these keys is pressed, the corresponding bit will be set high and it will return
low when the key is released.
The appendix of this manual shows, for each keyboard, the code for each key. See "Logic outputs
of key status" on page 689.
To Next Page
Loading...
