Fagor CNC 8055i FL EN - Page 539

Installation manual
CNC 8055
CNC 8055i
ACCESS TO INTERNAL CNC VARIABLES
13.
SOFT: V02.2X
·539·
Variables associated with work zones
FOZUP(X-C)
Upper limit of zone 4 along the selected axis (X-C).
FIZONE
Status of work zone 5.
FIZLO(X-C)
Lower limit of zone 5 along the selected axis (X-C).
FIZUP(X-C)
Upper limit of zone 5 along the selected axis (X-C).