Installation manual
CNC 8055
CNC 8055i
ACCESS TO INTERNAL CNC VARIABLES
13.
SOFT: V02.2X
·563·
Operating-mode related variables
70 = DNC status.
71 = CNC status.
80 = PLC file editing.
81 = PLC program compilation.
82 = PLC monitoring.
83 = Active PLC messages.
84 = Active PLC pages.
85 = Save PLC program.
86 = Restore PLC program.
87 = PLC usage maps.
88 = PLC statistics.
90 = Customizing.
100 = General machine parameter table.
101 = Axis machine parameter tables.
102 = Spindle machine parameter table.
103 = Serial port machine parameter tables.
104 = PLC machine parameter table.
105 = M function table.
106 = Leadscrew error compensation tables and cross compensation tables.
107 = Machine parameter table for Ethernet.
110 = Diagnosis: configuration
111 = Diagnosis: hardware test.
112 = Diagnosis: RAM memory test.
113 = Diagnosis: Flash memory test.
114 = User diagnosis.
115 = Hard disk diagnosis (HD).
116 = Circle geometry test.
117 = Oscilloscope.
120 = DERGAIN auto-adjustment.
130 = Change of dates.
131 = Change of passwords.
To Next Page
Loading...
