·564·
Installation manual
CNC 8055
CNC 8055i
13.
ACCESS TO INTERNAL CNC VARIABLES
SOFT: V02.2X
Operating-mode related variables
Read-only variables related to the conversational mode (MC, TC,
MCO, TCO) and configurable mode M, T ([SHIFT]-[ESC])
In these work modes, it is recommended to use variables OPMODA, OPMODB and OPMODC. The
OPMODE variable is generic and contains different values to those of the standard mode.
OPMODE
It returns the code corresponding to the selected operating mode.
0 = CNC starting up.
10 = In execution mode.
In execution or waiting for the [CYCLE START] key (drawing of the [CYCLE START] on top).
12 = Indicates one of the following situations:
- In MDI mode, when pressing the ISO key from the jog mode or tool inspection mode.
- One of the following fields of the main screen that admits the START key has been selected:
Axes, T, F or S.
21 = In graphic simulation mode.
30 = Cycle editing.
40 = In Jog mode (standard screen).
43 = Doing a home search.
45 = In tool calibration mode.
60 = Managing parts. PPROG mode.
OPMODA
Indicates the operating mode currently selected when working with the main channel.
Use the OPMODE variable to know at any time the selected operating mode (main channel, user
channel, PLC channel).
This information is given at the least significant bits with a "1" when active and with a "0" when not
active or when it is not available in the current version.
Bit 0 Program in execution.
Bit 1 Program in simulation.
Bit 2 Block in execution via MDI, JOG.
Bit 3 Repositioning in progress.
Bit 4 Program interrupted by CYCLE STOP.
Bit 5 MDI, JOG block interrupted.
Bit6 Repositioning interrupted.
Bit 7 In tool inspection.
Bit 8 Block in execution via CNCEX1.
Bit 9 CNCEX1 block interrupted.
Bit 10 CNC ready to accept JOG movements: manual, handwheel, teaching, inspection.
Bit 11 CNC ready to accept running order (START): execution, simulation with
movement and MDI modes.
Bit 12 The CNC is not ready to execute anything involving axis or spindle movement.
Bit 13 It identifies the block search.
To Next Page
Loading...
