Installation manual
CNC 8055
CNC 8055i
ACCESS TO INTERNAL CNC VARIABLES
13.
SOFT: V02.2X
·565·
Operating-mode related variables
OPMODB
Indicates the type of simulation currently selected. This information is given at the least significant
bits indicating with a "1" the one currently selected.
Bit 0 Theoretical path.
Bit 1 G functions.
Bit 2 G M S T functions.
Bit 3 Main plane.
Bit 4 Rapid.
Bit 5 Rapid (S=0).
OPMODC
Indicates the axes selected by handwheel. This information is given at the least significant bits
indicating with a "1" the one currently selected.
Bit 0 Axis 1.
Bit 1 Axis 2.
Bit 2 Axis 3.
Bit 3 Axis 4.
Bit 4 Axis 5.
Bit 5 Axis 6.
Bit 6 Axis 7.
Bit 7
Bit 8
The axis name corresponds to the number according to the programming order for them.
Example: If the CNC controls axes X, Y, Z, U, B, C, axis 1=X, axis2=Y, axis3=Z, axis4=U, axis5=B,
axis6=C.
To Next Page
Loading...
