Fagor CNC 8055i FL EN - Page 567

Installation manual
CNC 8055
CNC 8055i
ACCESS TO INTERNAL CNC VARIABLES
13.
SOFT: V02.2X
·567·
Other variables
GGSD
It returns the status of functions G5 through G99. The status of each one of the functions will be
given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not active
or when not available in the current software version.
GGSE
It returns the status of functions G100 through G124. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSF
It returns the status of functions G125 through G149. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSG
It returns the status of functions G150 through G174. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSH
It returns the status of functions G175 through G199. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSI
It returns the status of functions G200 through G224. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSJ
It returns the status of functions G225 through G249. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
GGSK
It returns the status of functions G250 through G274. The status of each one of the functions will
be given in the 25 least significant bits and it will be indicated by a 1 when active and a 0 when not
active or when not available in the current software version.
G99 G98 G97 G96 G95 ... G79 G78 G77 G76 G75
G124 G123 G122 G121 G120 ... G104 G103 G102 G101 G100
G149 G148 G147 G146 G145 ... G129 G128 G127 G126 G125
G174 G173 G172 G171 G170 ... G154 G153 G152 G151 G150
G199 G198 G197 G196 G195 ... G179 G178 G177 G176 G175
G224 G223 G222 G221 G220 ... G204 G203 G202 G201 G200
G249 G248 G247 G246 G245 ... G229 G228 G227 G226 G225
G274 G273 G272 G271 G270 ... G254 G253 G252 G251 G250