CNC 8055
CNC 8055i
SOFT: V02.2X
15
·591·
CUSTOMIZABLE SCREENS
The machine manufacturer may customize some of the CNC screens to:
(1) display more information.
(2) display the same information but in a different way.
(3) display a completely different screen in contents and looks.
All of them use OEM screens that have been created on a PC using the Fagor WINDRAW55
application software and have been sent out to the CNC using the Fagor WinDNC application
software.
• In (1) the OEM screen (consumption led bar graph) is superimposed on the standard CNC
screen.
• In (2) the upper area corresponds to the standard screen and the lower area shows the part of
the machine manufacturer (OEM).
• In (3) the OEM screen replaces completely the standard CNC screen.
Use the configuration file at the CNC to define how the screens are to be laid out and which values
must be displayed on the OEM screen.
To Next Page
Loading...
