·592·
Installation manual
CNC 8055
CNC 8055i
15.
CUSTOMIZABLE SCREENS
SOFT: V02.2X
Managing "PNG" and "JPG" graphic elements
From V02.0x and following versions, PNG and JPG/JPEG type graphic elements can be handled.
These graphic elements may be used on standard screens of the CNC such as icons or customized
using version V3 of the WINDRAW55 program.
This type of graphic elements cannot be handled directly with the CNC screen customizing tools
on its graphic editor, nor can they be displayed on the CNC customized screen because only ".SIM"
and ".PAN" items can be displayed.
There is now an option to define the customized screen (page) zero with PNG/JPEG type images.
When having several images, the order of priorities will be the following:
1. 000.jpg, 000.jpeg, 000.JPG, 000.JPEG
2. 000.png, 000.PNG
3. 000.pan
4. Fagor standard start-up (home) screen.
Compatibilities:
The modular CNC8055 does not display PNG and JPG type graphic elements.
Loading graphic elements:
PNG and JPG type graphic elements of the WINDRAW55 are loaded into the CNC via FTP or using
a pendrive through the USB port. When using a pendrive, it will do a general BACKUP / RESTORE
and when selecting the "pages and symbols" option, it will automatically include the PNG/JPG files
in that BACKUP / RESTORE.
Version V3 of WINDRAW55 can handle a 32-color palette, making it possible to create new screens and
adapt old screens or cycles to the current look.
WinDNC:
For the management of PNG and JPG graphical elements, WinDNC Version 6.02 must be used. This
process is not possible with previous WinDNC versions.
WINDRAW55:
A 32-color graphic file cannot be opened in CNC versions prior to V02.00. When trying to open a
".WGD" an error message will be issued indicating incompatibility between versions. When trying to
open a ".PAN" or ".SIM" file, the 32-color graphic elements will not be displayed.
The ".PAN" and ".SIM" created with a 32-color WINDRAW55 cannot be displayed
or changed from the graphic editor of the CNC8055.
To Next Page
Loading...
