Installation manual
CNC 8055
CNC 8055i
CUSTOMIZABLE SCREENS
15.
SOFT: V02.2X
·605·
Error log file (P999500)
15.7 Error log file (P999500)
Every time a customized screen is accessed, the CNC checks the section of that screen in the
configuration file.
If it has errors, it displays the standard screen instead of the customized one.
If the error has been detected in a section defined after the DEBUG instruction, it generates, in
program P999500 several lines indicating the detected error or errors.
The error log file (P999500) contains all the errors detected since the CNC was turned on. When
the CNC is turned off, this error log file (P999500) is deleted.
Examples of detected errors:
Error due to a nonexistent variable. It must be FLWEX
;(AUTOREFRESH W2=FLWEXX)
; Syntax error ...
; Unknown CNC variable name
; Error on line: 12
; Error on character: LF
Error caused for referring to a nonexistent graphic element (W33).
;(AUTOREFRESH W33=PLCR124)
; Warning...
; Programmed Widget does not exist.
; Warning in line: 15
To Next Page
Loading...
