·610·
Installation manual
CNC 8055
CNC 8055i
16.
CONFIGURABLE WORK MODE
SOFT: V02.2X
Tool control
16.2 Tool control
To select another tool, press:
The CNC will manage the tool change and the T model updates its graphic representation.
Another offset may be assigned to the tool temporarily without modifying the one associated with it.
To access the "D" field, press:
The CNC temporarily assumes the new offset for the current tool. The internal table is not modified,
the tool’s associated offset is still the one assigned to it when it was calibrated.
Value
Tool offset number
To Next Page
Loading...
