·612·
Installation manual
CNC 8055
CNC 8055i
16.
CONFIGURABLE WORK MODE
SOFT: V02.2X
MDI
16.4 MDI
To use the MDI option in this work mode, send the key code "$F01E (61470)" from the PLC to the
CNC.
In the next example, there is an external push button connected to input I13 and the MDI mode is
activated every time this button is pressed or when pressing a free key of the front panel.
( ) = MOV 0 R100 = MOV 1 R101 = MOV $F01E R102
Initializations.
DFU I13 OR DFU B?? R???
Every time one of the keys is pressed...
= CNCWR(R101, KEYSRC, M1)
... it indicates to the CNC that the keys come from the PLC.
= CNCWR(R102, KEY, M1)
... a code is sent out to activate the MDI mode.
= CNCWR(R100, KEYSRC, M1)
... and it indicates to the CNC that the keys come from the CNC.
In MDI mode, the CNC shows a window at the bottom of the screen.
In this window, a block may be edited and later executed.
To Next Page
Loading...
