·614·
Installation manual
CNC 8055
CNC 8055i
16.
CONFIGURABLE WORK MODE
SOFT: V02.2X
Associated keys
16.6 Associated keys
Screens 001 through 200 are grouped in 20 groups. Keys F1 through F7 allow direct access to the
first 7 groups; the rest of the grops are accessed by sending a key code from the PLC.
Each group has 10 different levels or screens. Once a group has been selected, send the code
"$F01C (61468)" for the [LEVEL CYCLE] key from the PLC to see the next level.
Now, let us see how the screens are grouped and how to access them.
When accessing a group, the CNC will show the last screen (level) used in that group.
To exit the screen:
• Press the key again or send the group code.
it shows the basic screen
• Press the key or send the code of another group.
shows the screen of the new group.
• Press [ESC] twice.
it shows the basic screen.
Key or code Screens
F1 key 1 21 41 61 81 101 121 141 161
F2 key 2 22 42 62 82 102 122 142 162
F3 key 3 23 43 63 83 103 123 143 163
F4 key 4 24 44 64 84 104 124 144 164
F5 key 5 25 45 65 85 105 125 145 165
F6 key 6 26 46 66 86 106 126 146 166
F7 key 7 27 47 67 87 107 127 147 167
$F108 (61704) 8 28 48 68 88 108 128 148 168
$F109 (61705) 9 29 49 69 89 109 129 149 169
$F10A (61706) 10 30 50 70 90 110 130 150 170
$F10B (61707) 11 31 51 71 91 111 131 151 171
$F10C (61708) 12 32 52 72 92 112 132 152 172
$F10D (61709) 13 33 53 73 93 113 133 153 173
$F10E (61710) 14 34 54 74 94 114 134 154 174
$F10F (61711) 15 35 55 75 95 115 135 155 175
$F110 (61712) 16 36 56 76 96 116 136 156 176
$F111 (61713) 17 37 57 77 97 117 137 157 177
$F112 (61714) 18 38 58 78 98 118 138 158 178
$F113 (61715) 19 39 59 79 99 119 139 159 179
$F114 (61716) 20 40 60 80 100 120 140 160 180
To Next Page
Loading...
