Installation manual
CNC 8055
CNC 8055i
CONFIGURABLE WORK MODE
16.
SOFT: V02.2X
·615·
Associated keys
Example. It has screens 1, 21, 41, 2 and 22.
Press F1.
it shows screen 1.
It sends the level key code.
it shows screen 21.
It sends the level key code.
it shows screen 41.
Press F2.
it shows screen 2.
It sends the level key code.
it shows screen 22.
Press F2.
it exits the screen and shows the basic screen.
Press F1.
it shows screen 41 (last one used in the group).
It sends the level key code.
it shows screen 1 (there are only 1, 21, 41).
Press F2.
it shows screen 22 (last one used in the group).
It sends the level key code.
it shows screen 2 (there are only 2, 22).
Press [ESC] twice.
it shows the basic screen.
The next example shows an external push button connected to input I27 that selects and unselects
the group of screens 13, 33, 53, etc.
( ) = MOV 0 R100 = MOV 1 R101 = MOV $F10D R102
Initializations.
DFU I27
Every time the external key is pressed...
= CNCWR(R101, KEYSRC, M1)
... it indicates to the CNC that the keys come from the PLC.
= CNCWR(R102, KEY, M1)
... it sends the key code for the group 13, 33, 53, etc.
= CNCWR(R100, KEYSRC, M1)
... and it indicates to the CNC that the keys come from the CNC.
To Next Page
Loading...
