Installation manual
CNC 8055
CNC 8055i
A.
SOFT: V02.2X
·647·
Technical characteristics of the 8055iCNC
Protection degree
Central unit: IP54 for the front panel and IP2X for the rear panel.
Accessible parts inside: IP1X.
Operator panel: IP54.
Battery
3.5 V lithium battery
Estimated life: 3 years
As from error indication (low battery) the information contained in the memory will be kept for 10 days maximum,
with the CNC off. It must be replaced.
Neither attempt to recharge the battery nor expose it to temperatures over 100 ºC (212 ºF).
Do not short-circuit the terminals for risk of explosion or combustion.
To Next Page
Loading...
