Fagor CNC 8055i FL EN - LCD Monitor + M, T, MC or TC Keyboard

Installation manual
CNC 8055
CNC 8055i
8055 CNC CONFIGURATION
1.
SOFT: V02.2X
·65·
Monitors
1.3.2 11" LCD monitor + M, T, MC or TC keyboard
Dimensions
Elements
W1 SUB-D type 25-pin female connector to connect the keyboard signals.
X1 SUB-D type 25-pin male connector to connect the video signals.
1. Ground terminal. All ground terminals of the machine must be connected to this terminal. Metric
6mm.
2. Mains plug. Use the connector supplied for A.C. power and ground connection.
3. Power switch.
4. Buzzer.
5. Type B USB connector to connect the extension cable between the CPU and the keyboard.
6. Type A USB connector to connect "pendrive" type memory devices. This connector is covered
with a plug fitted into the connector, remove the plug to use the connector.
FAGOR
0
2
4
10
20
30
40
50
60
70
80
90
100
110
120
FEED %
SPI NDLE
JOG
100
10
1
1
10
100
1000
10000
350(13.78)
165(6.496)165(6.496)
420(16.535)
200(7.874) 200(7.874)
10(0.394)
10(0.394)
20(0.787)
5(0.2)
20(0.787)
287,8x220(11.33x8.66)
380(14.961)
68,5(2.7)
FAGOR
0
2
4
10
20
30
40
50
60
70
80
90
100
110
120
FEED %
SPINDLE
JOG
100
10
1
1
10
100
1000
10000
6
W1
1
2
3
X2
4
X1
5