Fagor CNC 8055i FL EN - Page 660

·660·
Installation manual
CNC 8055
CNC 8055i
F.
SOFT: V02.2X
Summary of internal CNC variables.
Variables associated with function G49
Variables associated with the definition of function G49.
Variables updated by the CNC once function G49 is executed.
Variables associated with machine parameters.
Work zone related variables.
Feedrate related variables.
Variable CNC PLC DNC
( section 13.3 )
ORGROX R R R X coordinate of the new part zero with respect to home.
ORGROY R R R Y coordinate of the new part zero with respect to home.
ORGROZ R R R Z coordinate of the new part zero with respect to home.
ORGROA R R R Value assigned to parameter A.
ORGROB R R R Value assigned to parameter B.
ORGROC R R R Value assigned to parameter C.
ORGROI R R R Value assigned to parameter I.
ORGROJ R R R Value assigned to parameter J.
ORGROK R R R Value assigned to parameter K.
ORGROQ R R R Value assigned to parameter Q.
ORGROR R R R Value assigned to parameter R.
ORGROS R R R Value assigned to parameter S.
GTRATY R R R Type of G49 programmed.
TOOROF R/W R/W R/W Position to be occupied by the spindle's main rotary axis.
TOOROS R/W R/W R/W Position to be occupied by the spindle's 2nd rotary axis.
Variable CNC PLC DNC
( section 13.4 )
MPGn R R - Value assigned to general machine parameter (n).
MP(X-C)n R R - Value assigned to (X-C) axis machine parameter (n).
MPSn R R - Value assigned to machine parameter (n) of the main spindle.
MPSSn R R - Value assigned to machine parameter (n) of the second spindle.
MPASn R R - Value assigned to machine parameter (n) of the auxiliary spindle.
MPLCn R R - Value assigned to machine parameter (n) of the PLC.
Variable CNC PLC DNC
( section 13.5 )
FZONE R R/W R Status of work zone 1.
FZLO(X-C) R R/W R Work zone 1. Lower limit along the selected axis (X/C).
FZUP(X-C) R R/W R Work zone 1. Upper limit along the selected axis (X-C).
SZONE R R/W R Status of work zone 2.
SZLO(X-C) R R/W R Work zone 2. Lower limit along the selected axis (X/C).
SZUP(X-C) R R/W R Work zone 2. Upper limit along the selected axis (X-C).
TZONE R R/W R Status of work zone 3.
TZLO(X-C) R R/W R Work zone 3. Lower limit along the selected axis (X/C).
TZUP(X-C) R R/W R Work zone 3. Upper limit along the selected axis (X-C).
FOZONE R R/W R Status of work zone 4.
FOZLO(X-C) R R/W R Work zone 4. Lower limit along the selected axis (X/C).
FOZUP(X-C) R R/W R Work zone 4. Upper limit along the selected axis (X-C).
FIZONE R R/W R Status of work zone 5.
FIZLO(X-C) R R/W R Work zone 5. Lower limit along the selected axis (X/C).
FIZUP(X-C) R R/W R Work zone 5. Upper limit along the selected axis (X-C).
Variable CNC PLC DNC
( section 13.6 )
FREAL R R R Real feedrate of the CNC in mm/min or inch/min.
FREAL(X-C) R R R Actual (real) CNC feedrate of the selected axis.
FTEO/X-C) R R R Theoretical CNC feedrate of the selected axis.