Installation manual
CNC 8055
CNC 8055i
8055 CNC CONFIGURATION
1.
SOFT: V02.2X
·67·
Operator panel
1.4 Operator panel
Independent keyboards are called operator panels. See "1.1 CNC structure" on page 27.
Operator panels available for the mill model
Operator panels available for the lathe model
All operator panels differ only on the keyboard; they have the same size and are connected the same
way with the central unit.
They all can have an optional alphanumeric keyboard where each key has a single letter or number
assigned to it (KB.40/55.ALFA). This keyboard is connected to the operator panel through the
KS50/55 adapter.
Monitor Reference
Alphanumeric operator panel Ref. OP.8040/55.ALFA
MC operator panel Ref. OP.8040/55.MC
MCO operator panel Ref. OP.8040/55.MCO/TCO
Monitor Reference
Alphanumeric operator panel Ref. OP.8040/55.ALFA
TC operator panel Ref. OP.8040/55.TC
TCO operator panel Ref. OP.8040/55.MCO/TCO
To Next Page
Loading...
