·672·
Installation manual
CNC 8055
CNC 8055i
H.
SOFT: V02.2X
Summary of PLC inputs and outputs
Axis logic inputs.
ACTGAINT M5063 Indicates that the CNC assumes the 3rd set of gains.
SKIPCYCL M5064 Go to the next hole after drilling or mill type threading withdrawal.
RETRACYC M5065 It indicates tha the Z axis has stopped before starting the withdrawal.
SETTMEM M5066 It can activate an error during a tool change.
RESTMEM M5067 It cancels the error state of the CNC.
Axis 1
Axis 2
Axis 3
Axis 4
Axis 5
Axis 6
Axis 7
LIMIT+ M5100
M5150
M5200
M5250
M5300
M5350
M5400 Travel limit overrun. Stops the axes and the
spindle. Displays the error.
LIMIT -* M5101
M5151
M5201
M5251
M5301
M5351
M5401 Travel limit overrun. Stops the axes and the
spindle. Displays the error.
DECEL* M5102
M5152
M5202
M5252
M5302
M5352
M5402 Home switch pressed.
INHIBIT* M5103
M5153
M5203
M5253
M5303
M5353
M5403 Inhibits axis movement.
MIRROR* M5104
M5154
M5204
M5254
M5304
M5354
M5404 Applies mirror image.
SWITCH* M5105
M5155
M5205
M5255
M5305
M5355
M5405 Swaps commands (axes with 1 drive)
DRO* M5106
M5156
M5206
M5256
M5306
M5356
M5406 DRO axis. (DRO*=1 and SERVOON*=0).
SERVO*ON M5107
M5157
M5207
M5257
M5307
M5357
M5407 Servo signal. (=1) closes the position loop
AXIS+* M5108
M5158
M5208
M5258
M5308
M5358
M5408 Moves the axis in JOG mode. Similar to JOG
keys.
AXIS -* M5109
M5159
M5209
M5259
M5309
M5359
M5409 Moves the axis in JOG mode. Similar to JOG
keys.
SPENA* M5110
M5160
M5210
M5260
M5310
M5360
M5410 With Sercos. Speed enable signal of the drive.
DRENA* M5111
M5161
M5211
M5261
M5311
M5361
M5411 With Sercos. Drive enable signal of the drive.
SYNCHRO* M5112
M5162
M5212
M5262
M5312
M5362
M5412 Couples the axis with the one indicated by
SYNCHRO*.
ELIMINA* M5113
M5163
M5213
M5263
M5313
M5363
M5413 It does not display the axis and cancels the
feedback alarms.
SMOTOF* M5114
M5164
M5214
M5264
M5314
M5364
M5414 Cancels the SMOTIME filter, axis parameter
SMOTIME (P58).
LIM*OFF M5115
M5165
M5215
M5265
M5315
M5365
M5415 It ignores the software limits.
MANINT* M5116
M5166
M5216
M5266
M5316
M5366
M5416 Activate the additive handwheel in each axis.
To Next Page
Loading...
