Operating manual
CNC 8055
CNC 8055i
TABLES
7.
·T· MODEL
SOFT: V02.2X
·131·
Tool table
Tool status.
It indicates the size of the tool and its status:
The tool size depends on the number of pockets it takes in the magazine and it is defined as follows:
N = Normal (family 0-199).
S = Special (family 200-255).
The tool status is defined as follows:
A = Available
E = Expired ("real life" greater than "nominal life").
R = Rejected by the PLC.
GEOMETRY
This softkey is available when the machine manufacturer has associated the tool geometry with the
tool. When selecting this option, the CNC lets access the tool geometry table.
To Next Page
Loading...
