147
Note: The parameters indicated between angular brackets are
optional.
Cycle Meaning
#PROBE 1
Tool calibration.
#PROBE 1 B F [K] [X U Y V Z W]
B: Safety distance (in radius)
F: Probing feedrate
K: Sides of the probe being used (if K0, X Z
sides; if K1, X Z Y+ sides; if K2, X Z Y- sides)
X..W: Tabletop probe position
#PROBE 2
Tabletop probe calibration.
#PROBE 2 B F [K] [X U Y V Z W]
B: Safety distance (in radius)
F: Probing feedrate
K: Sides of the probe being used (if K0, X Z
sides; if K1, X Z Y+ sides; if K2, X Z Y- sides)
X..W: Tabletop probe position
MEASURING AND
CALIBRATION CYCLES (T)
To Next Page
Loading...
