Fagor CNC 8060 - Softkey Menus. Options of the Messages Service

Operating manual.
CNC 8060
CNC 8065
20.
PLC
"Messages" service
·380·
(REF: 1807)
20.13.1 Softkey menus. Options of the "Messages" service.
Softkey. Description.
Save the message and error table into a file in ASCII format (*.MEF).
Recover the table values saved earlier in the hard disk of the CNC.
Print the message and error table out to a printer connected to the CNC or as a file
(*.PRN format) at the CNC.
Define a new message in the table.
Define a new error in the table.
Select the file for additional information.
Delete the selected message or error from the table.