Operating manual.
CNC 8060
CNC 8065
24.
DIAGNOSIS
Configuration diagnosis
·454·
(REF: 1807)
24.2.2 Software diagnosis
This option may be used to analyze the modules that make up the CNC software and the
software options installed.
Module information
When selecting this configuration element, the diagnosis window shows the list of the
modules that make up the CNC software.
A Modules listing.
B Detailed information of the selected module.
It shows the size of each module (in bytes) and the date it was created. When selecting a
module from the list, the bottom of the screen shows more detailed information.
Software options
When selecting this element of the configuration, the diagnosis window shows the software
options currently installed.
It also shows the horizontal softkey "Validation code" for entering the resulting validation
code according to the hardware ID of the unit and the desired options.
To Next Page
Loading...
