Fagor CNC 8060 - Horizontal Softkey Menu

Operating manual.
CNC 8060
CNC 8065
HOW TO OPERATE THE CNC
3.
Horizontal softkey menu
·69·
(REF: 1807)
3.3 Horizontal softkey menu
Softkey tree based on popup menus so there is only one softkey level.
The softkey menu expands and shrinks with keys [F1] through
[F7]. The softkey of the pop-up menu are selected with the
[ENTER] key or from the numeric keypad using the number that
comes with each softkey.