Fagor CNC 8065 - Protection Passwords

Installation manual
CNC 8060
CNC 8065
LOGIC CNC INPUTS AND OUTPUTS.
6.
(REF: 1402)
·335·
Keystroke modifiable signals.
6.12 Keystroke modifiable signals.
KEYLED1 / KEYLED2
These registers control the LED's (lamps) of the keys of all the operator panels at the same
time.
KEYLED1_1 / KEYLED2_1
··
KEYLED1_8 / KEYLED2_8
These registers control the LED's (lamps) of the keys of each operator panel. Registers
KEYLED1_1 and KEYLED2_1 correspond to the first jog panel, KEYLED1_2 and
KEYLED2_2 to the second one and so on.
Registers KEYLED1 / KEYLED1_1 to KEYLED1_8. User keys.
The following instruction changes the status of the led of the first user key ()bit 0) every time
the key is pressed.
DFU B0KEYBD1_2 = CPL B0KEYLED1_2
Bit Jog Panel
0User key 1
1User key 2
2User key 3
3User key 4
4User key 5
5User key 6
6User key 7
7User key 8
8User key 9
9User key 10
10 User key 11
11 User key 12
12 User key 13
13 User key 14
14 User key 15
15 User key 16
1 16
J
O
G
K
EY
S