·484·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Configuration of the HSC mode (High Speed Cutting).
9.9 Configuration of the HSC mode (High Speed Cutting).
Part-programs generated by CAD/CAM systems consist of a large number of blocks of all
sizes, from a few millimeters to a few tenths of a micron.
In this type of parts, the CNC must be capable to analyze a large number of points in advance
so it can generate a continuous path that goes through (or near) the points of the program
while keeping (the best way possible) the programmed feedrate and the restrictions of
maximum acceleration, jerk, etc of each axis and of the path.
The command to execute this type of programs, typical of high speed machining, is carried
out with the instruction #HSC. This function offers several ways to work; optimizing the
chordal error (CONTERROR mode) or the machining feedrate (FAST mode).
To Next Page
Loading...
