Fagor CNC 8065 - Page 526

·526·
Installation manual
CNC 8060
CNC 8065
9.
CONCEPTS.
(REF: 1402)
Remote module RCS-S.
Parameters SERCOUNTID1 through SERCOUNTID8 set the order (sequence) of the
feedback inputs. Since SERCOUNTID1=5 and SERCOUNTID2=3, the first feedback input
will be the first one of node 5.
Axis. Parameter. Value.
X axis. DRIVETYPE
COUNTERTYPE
COUNTERID
ANAOUTTYPE
ANAOUTID
Analog.
Sercos counter.
5.
Sercos counter.
6.
Y axis. DRIVETYPE
COUNTERTYPE
COUNTERID
ANAOUTTYPE
ANAOUTID
Analog.
Sercos counter.
3.
Sercos counter.
5.
Z axis. DRIVETYPE
COUNTERTYPE
COUNTERID
ANAOUTTYPE
ANAOUTID
Analog.
Sercos counter.
1.
Sercos counter.
4.
U axis. DRIVETYPE
DRIVEID
OPMODEP
FBACKSRC
COUNTERTYPE
COUNTERID
Sercos.
2.
Speed.
External.
Sercos counter.
2.
V axis. DRIVETYPE
DRIVEID
Sercos.
1.
Handwheel MANPG
COUNTERTYPE
COUNTERID
1.
Sercos counter.
6.
Spindle S DRIVETYPE
DRIVEID
Sercos.
4.