·532·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables in a single-channel system.
Variables of the master spindle.
In a multi-spindle system, the master spindle is the main spindle, the one receiving the
commands when no specific spindle is mentioned. In a single-spindle channel, that will be
its master spindle.
The variables of the master spindle are identified with the prefix –SP.– but without indicating
the spindle. These variables may be used to access the data of the master spindle without
knowing its name or logic number. These variables are meant for displaying data and
programming cycles.
To Next Page
Loading...
