Fagor CNC 8065 - Page 534

·534·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables in a multi-channel system.
Axis and spindle variables.
Axis and spindle variables are identified with the prefix –A.–. When these variables refer to
a spindle, they may also be accessed with the prefix –SP.–.
(V.)[channel].A.{variable}.{axis/spindle}
(V.)[channel].SP.{variable}.{spindle}
(V.)[channel].SP.{variable}
The variables of the axis machine parameters (–MPA.– prefix) can also be accessed using
the –SP– prefix when referring to a spindle.
(V.)[channel].MPA.{variable}.{axis/spindle}
(V.)[channel].SP.{variable}.{spindle}
(V.)[channel].SP.{variable}
Identifying the axes and the spindles in the variables.
In these variables one must indicate which axis or spindle they refer to. In variables with the
prefix –A.– and –MPA.–, the axes and the spindles are identified with their name, logic
number or index in the channel. In variables with the prefix –SP.–, the spindles are identified
with their name, index in the channel or spindle index. If no spindle is selected in the variables
with -SP.- prefix, the variable refers to the master spindle.
S User global variables.
SP Spindle related variables.
TM Variables related to tools or tool magazines.
Mnemoni. Meaning when the variable is executed by the part-
program, the MDI/MDA mode or the PLC.
V.MPA .variable.Z
V.A.variable.Z
Z axis.
V.MPA .variable.S
V.A.variable.S
V.SP.variable.S
Spindle S.
V.MPA .variable.4
V.A.variable.4
Axis or spindle with logic number ·4·.
V.[2].MPA.variable.4
V.[2].A.variable.4
Axis with index ·4· in the channel ·2·.
V.SP.variable.2 Spindle with index ·2· in the system.
V.[2].SP.variable.1 Spindle with index ·1· in the channel ·2·.
V.SP.variable Master spindle of the channel. If the variable is executed by
the PLC, spindle master of the first channel.
V.[2].SP.variable Master spindle of channel ·2·.
Mnemoni. Meaning when the variable is executed by an external
interface.
V. MPA .va ri abl e. Z
V. A. va ri abl e. Z
Z axis.
V. MPA .va ri abl e. S
V. A. va ri abl e. S
V. SP. va r ia bl e. S
Spindle S.
V. MPA .va ri abl e. 4
V. A. va ri abl e. 4
Axis with logic number ·4·.
V.[2].MPA.variable.4
V.[2].A.variable.4
Axis with index ·4· in the channel ·2·.
V.SP.variable.2 Spindle with index ·2· in the active channel.
V.[2].SP.variable.1 Spindle with index ·1· in the channel ·2·.
V.SP.variable Master spindle of the active channel.
V.[2].SP.variable Master spindle of channel ·2·.
Prefix. Meaning.