Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·581·
Variables related to axis and spindle machine parameters.
·xn· Name, logic number or index of the axis.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.DRIVETYPE.xn
(V.)[ch].MPA.DRIVETYPE.sn
(V.)[ch].SP.DRIVETYPE.sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified during setup.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for an analog, position-Sercos, velocity-Sercos and Mechatrolink drive.
The variable returns the execution value; reading it interrupts block preparation.
Channel [ch]. Type of drive.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].MPA.POSUNITS.xn
(V.)[ch].MPA.POSUNITS.sn
(V.)[ch].SP.POSUNITS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for a position-Sercos, velocity-Servos and Mechatrolink drive.
The variable returns the value of block preparation.
Channel [ch]. Units systgen used by the feedback system.
V.MPA.AXISTYPE.Z Z axis.
V.MPA.AXISTYPE.4 Axis with logic number ·4·.
V.[2].MPA.AXISTYPE.1 Axis with index ·1· in the channel ·2·.
Value. Meaning.
1 Linear axis.
2 Rotary axis.
V.MPA.DRIVETYPE.Z Z axis.
V.MPA.DRIVETYPE.S Spindle S.
V.SP.DRIVETYPE.S Spindle S.
V.SP.DRIVETYPE Master spindle.
V.MPA.DRIVETYPE.4 Axis or spindle with logic number ·4·.
V.[2].MPA.DRIVETYPE.1 Axis with index ·1· in the channel ·2·.
V.SP.DRIVETYPE.2 Spindle with index ·2· in the system.
V.[2].SP.DRIVETYPE.1 Spindle with index ·1· in the channel ·2·.
Value. Meaning.
1 Analog drive.
2 Sercos drive.
16 Simulated drive.
32 Mechatrolink drive.
To Next Page
Loading...
