Fagor CNC 8065 - Variables Related to Machine Parameters for the Tool Magazine

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·681·
Variables related to machine parameters for the tool magazine.
10.11 Variables related to machine parameters for the tool magazine.
(V.)TM.NTOOLMZ
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of tool magazines.
(V.)TM.MZGROUND
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Ground tools are permitted (manual load).
Values of the variable.
This variable returns one of the following values.
(V.)TM.MZSIZE[mz]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Tool magazine [mz]. Size of the tool magazine (number of pockets).
Syntax.
·mz· Type of tool magazine.
(V.)TM.MZRANDOM[mz]
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Tool magazine [mz]. Random magazine.
In a random tool magazine, the tools can occupy any position. In a non-random tool
magazine, the tools always occupy the same position.
Syntax.
·mz· Type of tool magazine.
Values of the variable.
This variable returns one of the following values.
V.TM.NTOOLMZ
V.TM.MZGROUND
Value. Meaning.
0No.
1Yes.
V.TM.MZSIZE[2] Magazine ·2·.
V.TM.MZRANDOM[2] Magazine ·2·.
Value. Meaning.
0 It is not a random tool magazine.
1 It is a random tool magazine.