·710·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
PLC consulting logic signals; tool manager.
10.18 PLC consulting logic signals; tool manager.
(V.)PLC.TMOPERATION
Variable that can only be read from the program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The manager indicates in this register the type of operation to be carried out by the PLC.
Values of the variable.
This variable returns one of the following values.
(V.)PLC.TMOPSTROBE
Variable that can only be read from the program and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
The manager turns this mark on to let the PLC know that it must execute the operation
indicated by TMOPERATION.
V.PLC.TMOPERATION Channel ·1·.
V.PLC.TMOPERATIONC1 Channel ·1·.
V.PLC.TMOPERATIONC2 Channel ·2·.
V.PLC.TMOPERATIONC3 Channel ·3·.
V.PLC.TMOPERATIONC4 Channel ·4·.
Value. Meaning.
0 Do nothing.
1 Take a tool from the magazine and insert it in the spindle.
2 Leave the spindle tool in the magazine.
3 Insert a ground tool in the spindle.
4 Leave the spindle tool on the ground.
5 Leave the spindle tool in the magazine and take another one from the magazine.
6 Leave the spindle tool in the magazine and take another one from ground.
7 Leave the spindle tool on the ground and take another one from the magazine.
8 Leave the spindle tool on the ground and take another one from ground.
9 Take a ground tool to the magazine going through the spindle.
10 Take a tool from the magazine and leave on the ground going through the spindle.
11 Orient the magazine.
12 Leave the spindle tool in the magazine and take another one from the same
magazine. Special for a synchronous magazine in the following cases:
• Non-random having a tool changer arm with two claws.
• Random when having special tools.
13 Orienting two magazines
14 Leave the spindle tool in a magazine and take another one from another magazine.
V.PLC.TMOPSTROBE Channel ·1·.
V.PLC.TMOPSTROBEC1 Channel ·1·.
V.PLC.TMOPSTROBEC2 Channel ·2·.
V.PLC.TMOPSTROBEC3 Channel ·3·.
V.PLC.TMOPSTROBEC4 Channel ·4·.
To Next Page
Loading...
