Fagor CNC 8065 - Page 747

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·747·
Variables associated with the Mechatrolink bus.
(V.)[ch].A.MALARM.xn
(V.)[ch].A.MALARM.sn
(V.)[ch].SP.MALARM.sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the oscilloscope environment.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for servo and Mechatrolink inverter.
The variable returns the execution value; reading it interrupts block preparation.
Alarm or error code of the device. Refer to the documentations of the device.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.MIOMON.xn
(V.)[ch].A.MIOMON.sn
(V.)[ch].SP.MIOMON.sn
Variable that can only be read from the program, PLC and interface.
Variable that may be modified from the oscilloscope environment.
Variable valid for rotary and linear axes as well as for spindles.
Variable valid for Mechatrolink servo.
The variable returns the execution value; reading it interrupts block preparation.
Status of the device inputs and outputs.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.MPA.MALARM.Z Z axis.
V.MPA.MALARM.S Spindle S.
V.SP.MALARM.S Spindle S.
V.SP.MALARM Master spindle.
V.MPA.MALARM.4 Axis or spindle with logic number ·4·.
V.[2].MPA.MALARM.1 Axis with index ·1· in the channel ·2·.
V.SP.MALARM.2 Spindle with index ·2· in the system.
V.[2].SP.MALARM.1 Spindle with index ·1· in the channel ·2·.
V.MPA.MIOMON.Z Z axis.
V.MPA.MIOMON.S Spindle S.
V.SP.MIOMON.S Spindle S.
V.SP.MIOMON Master spindle.
V.MPA.MIOMON.4 Axis or spindle with logic number ·4·.
V.[2].MPA.MIOMON.1 Axis with index ·1· in the channel ·2·.
V.SP.MIOMON.2 Spindle with index ·2· in the system.
V.[2].SP.MIOMON.1 Spindle with index ·1· in the channel ·2·.