Fagor CNC 8065 - Variables Associated with the Feedback Inputs for Analog Axes

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·753·
Variables associated with the feedback inputs for analog axes.
10.32 Variables associated with the feedback inputs for analog axes.
(V.)[ch].A.COUNTERST.xn
(V.)[ch].A.COUNTERST.sn
(V.)[ch].SP.COUNTERST.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Status of the feedback input.
For a feedback input to be active, it must have an analog axis associated with it.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.COUNTER.xn
(V.)[ch].A.COUNTER.sn
(V.)[ch].SP.COUNTER.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Feedback input pulses (integer side + fraction side).
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.ASINUS.xn
(V.)[ch].A.ASINUS.sn
(V.)[ch].SP.ASINUS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Fraction side of the A signal.
V.A.COUNTERST.Z Z axis.
V.A.COUNTERST.S Spindle S.
V.SP.COUNTERST.S Spindle S.
V.SP.COUNTERST Master spindle.
V.A.COUNTERST.4 Axis or spindle with logic number ·4·.
V.[2].A.COUNTERST.1 Axis with index ·1· in the channel ·2·.
V.SP.COUNTERST.2 Spindle with index ·2· in the system.
V.[2].SP.COUNTERST.1 Spindle with index ·1· in the channel ·2·.
V.A.COUNTER.Z Z axis.
V.A.COUNTER.S Spindle S.
V.SP.COUNTER.S Spindle S.
V.SP.COUNTER Master spindle.
V.A.COUNTER.4 Axis or spindle with logic number ·4·.
V.[2].A.COUNTER.1 Axis with index ·1· in the channel ·2·.
V.SP.COUNTER.2 Spindle with index ·2· in the system.
V.[2].SP.COUNTER.1 Spindle with index ·1· in the channel ·2·.