·754·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables associated with the feedback inputs for analog axes.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.BSINUS.xn
(V.)[ch].A.BSINUS.sn
(V.)[ch].SP.BSINUS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Fraction side of the B signal.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.ASINUS.Z Z axis.
V.A.ASINUS.S Spindle S.
V.SP.ASINUS.S Spindle S.
V.SP.ASINUS Master spindle.
V.A.ASINUS.4 Axis or spindle with logic number ·4·.
V.[2].A.ASINUS.1 Axis with index ·1· in the channel ·2·.
V.SP.ASINUS.2 Spindle with index ·2· in the system.
V.[2].SP.ASINUS.1 Spindle with index ·1· in the channel ·2·.
V.A.BSINUS.Z Z axis.
V.A.BSINUS.S Spindle S.
V.SP.BSINUS.S Spindle S.
V.SP.BSINUS Master spindle.
V.A.BSINUS.4 Axis or spindle with logic number ·4·.
V.[2].A.BSINUS.1 Axis with index ·1· in the channel ·2·.
V.SP.BSINUS.2 Spindle with index ·2· in the system.
V.[2].SP.BSINUS.1 Spindle with index ·1· in the channel ·2·.
To Next Page
Loading...
