Fagor CNC 8065 - Page 760

·760·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to loop adjustment.
(V.)[ch].A.FILTEROUT.xn
(V.)[ch].A.FILTEROUT.sn
(V.)[ch].SP.FILTEROUT.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Theoretical coordinate of the interpolator after the filter.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.LOOPTPOS.xn
(V.)[ch].A.LOOPTPOS.sn
(V.)[ch].SP.LOOPTPOS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Theoretical coordinate at the input of the position loop.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.LOOPPOS.xn
(V.)[ch].A.LOOPPOS.sn
(V.)[ch].SP.LOOPPOS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Real coordinate at the input of the position loop.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.A.FILTEROUT.Z Z axis.
V.A.FILTEROUT.S Spindle S.
V.SP.FILTEROUT.S Spindle S.
V.SP.FILTEROUT Master spindle.
V.A.FILTEROUT.4 Axis or spindle with logic number ·4·.
V.[2].A.FILTEROUT.1 Axis with index ·1· in the channel ·2·.
V.SP.FILTEROUT.2 Spindle with index ·2· in the system.
V.[2].SP.FILTEROUT.1 Spindle with index ·1· in the channel ·2·.
V.A.LOOPTPOS.Z Z axis.
V.A.LOOPTPOS.S Spindle S.
V.SP.LOOPTPOS.S Spindle S.
V.SP.LOOPTPOS Master spindle.
V.A.LOOPTPOS.4 Axis or spindle with logic number ·4·.
V.[2].A.LOOPTPOS.1 Axis with index ·1· in the channel ·2·.
V.SP.LOOPTPOS.2 Spindle with index ·2· in the system.
V.[2].SP.LOOPTPOS.1 Spindle with index ·1· in the channel ·2·.