Fagor CNC 8065 - Page 761

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·761·
Variables related to loop adjustment.
·sn· Name, logic number or index of the spindle.
POSITION INCREMENT AND SAMPLING PERIOD.
(V.)[ch].A.POSINC.xn
(V.)[ch].A.POSINC.sn
(V.)[ch].SP.POSINC.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Real position increment of the current sampling period.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
(V.)[ch].A.TPOSINC.xn
(V.)[ch].A.TPOSINC.sn
(V.)[ch].SP.TPOSINC.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Theoretical position increment of the current sampling period.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.A.LOOPPOS.Z Z axis.
V.A.LOOPPOS.S Spindle S.
V.SP.LOOPPOS.S Spindle S.
V.SP.LOOPPOS Master spindle.
V.A.LOOPPOS.4 Axis or spindle with logic number ·4·.
V.[2].A.LOOPPOS.1 Axis with index ·1· in the channel ·2·.
V.SP.LOOPPOS.2 Spindle with index ·2· in the system.
V.[2].SP.LOOPPOS.1 Spindle with index ·1· in the channel ·2·.
V.A.POSINC.Z Z axis.
V.A.POSINC.S Spindle S.
V.SP.POSINC.S Spindle S.
V.SP.POSINC Master spindle.
V.A.POSINC.4 Axis or spindle with logic number ·4·.
V.[2].A.POSINC.1 Axis with index ·1· in the channel ·2·.
V.SP.POSINC.2 Spindle with index ·2· in the system.
V.[2].SP.POSINC.1 Spindle with index ·1· in the channel ·2·.
V.A.TPOSINC.Z Z axis.
V.A.TPOSINC.S Spindle S.
V.SP.TPOSINC.S Spindle S.
V.SP.TPOSINC Master spindle.
V.A.TPOSINC.4 Axis or spindle with logic number ·4·.