Fagor CNC 8065 - Variables Related to User Tables (Zero Offset Table)

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·769·
Variables related to user tables (zero offset table).
10.38 Variables related to user tables (zero offset table).
(V.)G.FORG
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
First zero offset in the table.
(V.)G.NUMORG
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of zero offsets in the table.
(V.)[ch].A.PLCOF.xn
(V.)[ch].A.PLCOF.sn
(V.)[ch].SP.PLCOF.sn
Variable that can be read and written from the program and from the PLC and read from the interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
xn axis. Offset of the zero offset set by PLC.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
V.G.FORG
V.G.FORG
V.A.PLCOF.Z Z axis.
V.A.PLCOF.S Spindle S.
V.SP.PLCOF.S Spindle S.
V.SP.PLCOF Master spindle.
V.A.PLCOF.4 Axis or spindle with logic number ·4·.
V.[2].A.PLCOF.1 Axis with index ·1· in the channel ·2·.
V.SP.PLCOF.2 Spindle with index ·2· in the system.
V.[2].SP.PLCOF.1 Spindle with index ·1· in the channel ·2·.
V.A.PLCOF.X
V.G.FORG