·770·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to user tables (zero offset table).
(V.)[ch].A.ACTPLCOF.xn
(V.)[ch].A.ACTPLCOF.sn
(V.)[ch].SP.ACTPLCOF.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
xn axis. Accumulated PLC offset.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
ZERO OFFSET TABLE (WITHOUT FINE SETTING OF THE
ABSOLUTE ZERO OFFSET).
The fine setting of the absolute zero offset is enabled via machine parameters (parameter
FINEORG)
(V.)[ch].A.ORG.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the value of block preparation.
xn axis. Value of the active zero offset (absolute G159 + incremental G158).
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.A.ACTPLCOF.Z Z axis.
V.A.ACTPLCOF.S Spindle S.
V.SP.ACTPLCOF.S Spindle S.
V.SP.ACTPLCOF Master spindle.
V.A.ACTPLCOF.4 Axis or spindle with logic number ·4·.
V.[2].A.ACTPLCOF.1 Axis with index ·1· in the channel ·2·.
V.SP.ACTPLCOF.2 Spindle with index ·2· in the system.
V.[2].SP.ACTPLCOF.1 Spindle with index ·1· in the channel ·2·.
V.A.ORG.Z Z axis.
V.A.ORG.3 Axis with logic number ·3·.
V.[2].A.ORG.3 Axis with index ·3· in the channel ·2·.
To Next Page
Loading...
