Fagor CNC 8065 - Variables Related to User Tables (Fixture Table)

·774·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to user tables (fixture table).
10.39 Variables related to user tables (fixture table).
(V.)G.FFIX
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
First fixture of the table.
(V.)G.NUMFIX
Variable that can only be read from the program, PLC and interface.
The variable returns the value of block preparation.
Number of fixtures in the table.
(V.)[ch].G.FIX
Variable that can be read and written from the program and read from the PLC and from the interface.
The variable returns the value of block preparation.
Report variable (to be used from the scripts).
Number of current fixture.
Syntax.
·ch· Channel number.
(V.)[ch].A.FIX.xn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the value of block preparation.
xn axis. Offset set in the current fixture.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
V.G.FFIX
V.G.NUMFIX
V.[2].G.FIX Channel ·2·. Number of current fixture.
V.A.FIX.Z Z axis.
V.A.FIX.3 Axis with logic number ·3·.
V.[2].A.FIX.3 Axis with index ·3· in the channel ·2·.
V.G.FFIX
V.A.FIXT[4].Y
V.G.NUMFIX