Fagor CNC 8065 - Page 807

Installation manual
CNC 8060
CNC 8065
CNC VARIABLES.
10.
(REF: 1402)
·807·
Variables associated with the tool manager.
Values of the variable.
This variable returns one of the following values.
(V.)[ch].TM.MZMODE
Variable that can be read and written from the program and interface and read from the PLC.
The variable returns the execution value; reading and writing it interrupt block preparation.
Operating mode of the tool manager.
This variable may be used to set the magazine in load or unload mode.
Syntax.
·ch· Channel number.
Values of the variable.
This variable returns one of the following values.
Value. Meaning.
0 No need to wait.
1 It has to wait.
V.[2].TM.MZMODE Channel ·2·.
Value. Meaning.
0 Regular work mode.
1 Magazine in load mode.
2 Magazine in unload mode.